Description
CPU : Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller
CPU Architecture : 64-bit x86
Floating Point Unit :
Encryption Engine : (AES-NI)
System Memory : 64 GB RDIMM DDR4 ECC (4 x 16 GB) per controller
Maximum Memory : 512 GB (8 x 64GB)
Memory Slot : 8 x R-DIMM/LR-DIMM DDR4
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
Flash Memory : 4GB (Dual boot OS protection)
Drive Bay : 16 x 3.5-inch
SAS 12Gb/s, backward-compatible to SAS 6Gb/s
Drive Compatibility : 3.5-inch bays:
3.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
The QDA-SA adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 3.5-inch SAS drive bay
Hot-swappable :
SSD Cache Acceleration Support :
Read cache only
Cache for Copy To Flash (C2F) : 1 per each controller (64GB M.2 SSD)
Gigabit Ethernet Port (RJ45) : 3 for each controller (one for remote management)
10 Gigabit Ethernet Port : 4 x 10GbE SFP+ for each controller
Wake on LAN (WOL) :
Jumbo Frame :
PCIe Slot : 2
Slot 1: PCIe Gen 3 x8 (CPU)
Slot 2: PCIe Gen 3 x8 (CPU)
USB 3.2 Gen 1 port : 2 per each controller
Note: The USB ports are for engineering purpose only. No external devices such as storage drives or UPS are supported.
Form Factor : 3U Rackmount
LED Indicators : System Power LED (Green): on/off
System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged
LCD Status Display (Two-digit number): Status of JBOD connection
Buttons : Power, Reset
Dimensions (HxWxD) : 132 × 483.05 × 630.62 mm
Weight (Net) : 25.83 kg
Weight (Gross) : 32.69 kg
Operating Temperature : 0 – 40 °C (32°F – 104°F)
Storage Temperature : -20 – 70°C (-4°F – 158°F)
Relative Humidity : 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit : Redundant/ Hot Swap Power Vin:90~264VAC;770W
Power Consumption: Operating Mode, Typical : 500.87 W
Tested with drives fully populated.
Fan : Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)
System Warning : Buzzer
Max. Number of Concurrent Connections (CIFS) – with Max. Memory : 10000
Safety Standard : FCC Class A (USA only)
CE Mark ( EN55022 Class A, EN55024)
EN60950
BSMI
VCCI
CB
LVD
